Use live data display tools

Display data using the tools available on the live data page.

The following sections will demonstrate the various tools which can be used to control displayed data on the live data page.

Add and remove data displays

To add a new display to the live data page, select the Add Display button on the bottom toolbar. Each new display will have its own Displayed Measurement and Displayed Units box and can be adjusted independently of other displays. Up to six live data displays can be shown at a time.

To remove a display from the page, select the Remove Display button on the top right of the readout you wish to remove.

Change the displayed measurement or units

1. Select the button containing the name of the currently selected measurement or calculation. (If no measurement is currently selected, the button will instead say Select.)
2. From the list of available measurements, select the name of the measurement or calculation you wish to display. The display will automatically update to show the live value of the selected measurement or calculation.

3. If desired, select the small Displayed Units button next to the Displayed Measurement button and select an appropriate unit from the dropdown list. The display will change to report the value of the measurement in the selected units.

   Note

   Not all measurements have multiple selectable units. When displaying a calculation, units cannot be changed.