Controls palette
Learn how to use each tool in the Controls palette.
Tip
Click Show or Hide to select which controls are visible. Click ✕ to hide the palette.
Recording Controls
-
Recording and Playback Controls
Use to toggle between the recording and playback controls. Use the recording controls to record data. Use the playback controls to play back previously recorded data.
-
Record, Monitor, and Execute
Click Record to begin recording data while in Continuous Mode. Click Monitor to begin monitoring data when in Keep or Fast Monitor Mode. Click Execute to begin executing code when no sensors are connected.
-
Recording Mode
Use to toggle between Continuous, Keep, and Fast Monitor Mode.
- Continuous Mode: Set to record data at a specified sample rate.
- Keep Mode: Set to manually sample data by clicking the Keep Sample button.
- Fast Monitor Mode: Set to monitor data without recording it. Use this mode for sampling rates greater than 1,000 Hz when displaying data in the Scope and FFT displays.
-
Clock
Displays the elapsed recording time.
-
Use to set the sample rate of a single sensor or multiple sensors.
- Menu: Click to select which sensor to set.
- Sample Rate: Enter the rate at which data will be collected from the selected sample.
- Zero Sensor Now: Click to zero the selected sensor.
-
Use to set conditions when data recording starts or stops.
-
Click to delete the most recent run. Click the down arrow to delete a specific run or all runs.
Playback Controls
Use the playback controls to perform an "instant replay" of recorded data. The playback controls are particularly useful for video analysis.
-
Recording and Playback Controls
Use to toggle between the recording and playback controls. Use the recording controls to record data. Use the playback controls to play back previously recorded data.
-
Slider
Click and drag to move the time forward or backward.
-
Run Selector
Click and select which run to view.
-
Clock
Displays the elapsed recording time.
-
Beginning of Recording
Click to go to the start of data collection at time 0.00.
-
Previous Sample
Click to move to the previously recorded data sample.
-
Play
Click to play or pause the data recording.
-
Next Sample
Click to move to the next recorded data sample.
-
End of Recording
Click to move to the last data sample.
-
Playback Rate
Click and select the rate to play back data.
-
Loop Recording
Click to have the recording automatically start at the beginning after reaching the end of the recording.